According to the label From the product label
These details were extracted from this product's label PDF.
The label is the law.
Confirm every rate, site, restriction and safety requirement against the label before mixing or applying.
Check for a
state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below.
·
EPA registration data for Reg. 19713-646-829 →
Captan Fungicide is a plant disease control product containing 50.0% active ingredient. It is used to control various fungal diseases on a wide range of crops, including alocasia, apples, apricots, blueberries, cherries, grapes, nectarines, peaches, plums, prunes, strawberries, azaleas, begonias, carnations, chrysanthemums, and gladiolus. The product is intended for outdoor use on various plants. Application methods vary by crop, typically involving spraying at specific rates such as 1 to 2 tablespoons per gallon of water for many fruit and ornamental plants. Users must be careful with compatibility, as Captan can cause injury to certain plants if applied with other chemicals or under specific climatic conditions. It is sensitive to sulfur; do not apply within 14 days of a sulfur application. Handling requires personal protective equipment (PPE), including chemical-resistant gloves, protective eyewear, and long-sleeved shirts/long pants to prevent skin and eye contact. It should be stored in a cool, dry place, away from food or feed. Always follow specific directions for each crop to ensure efficacy and prevent plant injury.
Pests covered (2)
fungal diseasesAnthracnose, Botrytis
Areas treatable (7)
AlocasiaApplesApricotsBlueberriesCherriesGrapesOrnamentals (Azaleas, Begonias, Carnations, Chrysanthemums, Gladiolus)
How to treat each type of area 7
Alocasia
| Target pest |
Location |
Rate |
Unit |
Dilution |
Label notes |
| fungal diseases |
Outdoor |
1 to 1.5 |
tablespoons per gallon of water |
1 to 1.5 tbsp/gal |
Spray 1 to 2 pints for smallest trees, 1 to 2 quarts per medium-size trees, and 1 to 3 gallons for larger trees. |
Apples
| Target pest |
Location |
Rate |
Unit |
Dilution |
Label notes |
| fungal diseases |
Outdoor |
1 to 1.5 |
tablespoons per gallon of water |
1 to 1.5 tbsp/gal |
Spray 1 to 2 pints for smallest trees, 1 to 2 quarts per medium-size trees, and 1 to 3 gallons for larger trees. Repeat at 7 to 14 day intervals. |
Apricots
| Target pest |
Location |
Rate |
Unit |
Dilution |
Label notes |
| fungal diseases |
Outdoor |
1 |
tablespoon per gallon of water |
1 tbsp/gal |
Spray 1 to 2 pints for smallest trees, 1 to 2 quarts per medium-size trees, and 1 to 3 gallons for larger trees. |
Blueberries
| Target pest |
Location |
Rate |
Unit |
Dilution |
Label notes |
| fungal diseases |
Outdoor |
1 |
tablespoon per gallon of water |
1 tbsp/gal |
Spray 1 to 2 pints for smallest trees, 1 to 2 quarts per medium-size trees, and 1 to 3 gallons for larger trees. |
Cherries
| Target pest |
Location |
Rate |
Unit |
Dilution |
Label notes |
| fungal diseases |
Outdoor |
1 |
tablespoon per gallon of water |
1 tbsp/gal |
Spray 1 to 2 pints for smallest trees, 1 to 2 quarts per medium-size trees, and 1 to 3 gallons for larger trees. |
Grapes
| Target pest |
Location |
Rate |
Unit |
Dilution |
Label notes |
| fungal diseases |
Outdoor |
1 to 1.5 |
tablespoons per gallon of water |
1 to 1.5 tbsp/gal |
Apply in pink bud, full bloom, and fall cover and sprays as needed. |
Ornamentals (Azaleas, Begonias, Carnations, Chrysanthemums, Gladiolus)
| Target pest |
Location |
Rate |
Unit |
Dilution |
Label notes |
| fungal diseases |
Outdoor |
2 to 4 |
tablespoons per gallon of water |
2 to 4 tbsp/gal |
Varies by specific ornamental type. |
Mixing instructions 1
| For pests |
Amount |
Per |
Label notes |
| fungal diseases |
1 to 4 |
tablespoons |
Strawberries: Use 1 to 4 tablespoons per gallon of water. |
Worker safety
PPE required
Chemical-resistant gloves, protective eyewear, long-sleeved shirts, and long pants.
Timing & weather
- Repeat applications at 7 to 14 day intervals as needed to maintain control.
- Avoid application during windy weather to prevent drift.
Use restrictions 4
- Do not apply within 14 days of a sulfur application.
- Do not apply to seed or seed pods.
- Do not apply to plants that will be eaten directly through or via skin/mucous membranes.
- Do not apply to any type of irrigation system.